How to : How to Make a Sock Monkey

Turn 2 socks inside out and lay them flat. You can use any socks you like, but the best ones have heels and toes in contrasting colors. You can use matching socks or different ones for a funky monkey! Whatever you use, pick socks that are clean and don’t have holes. Spread your inside-out socks flat on your work surface so the heels face up.^[1]

Cut the sock from the opening to 1 in (2.5 cm) from the colored heel. This splits the sock into legs so make sure you’re cutting through both layers of fabric.^[2]

Sew straight along each inner leg and stop 1 in (2.5 cm) from the end. You can use a sewing machine or needle and thread to stitch your monkey. Either way, sew along the bottom of the cuff to close the bottom of each leg before you sew up the inner leg.^[3]

Turn the sock right side out and stuff it with polyfill. Take a small handful of fluffy polyfill and push it through the gap between the monkey’s legs. Keep adding polyfill until the entire sock monkey is stuffed and as firm as you like.^[4]

Sew the gap between the legs closed so the stuffing doesn’t fall out. Grab your needle and thread again and pinch the fabric together at the gap. You can use any stitch you like to sew the opening between the monkey’s legs closed. You may want to go over the space a second time so it’s super secure and stuffing won’t come out.^[5]

Tie a rubber band around the top 1/3 of the body. To shape the head, wrap your index finger and thumb around the top of the stuffed sock. Then, take a rubber band or elastic hairband and twist it around the sock so the top looks like a rounded head. Now, you can set this sock aside while you work on the arms and other parts of your monkey.^[6]

Cut your second sock into the 6 pieces on the template. You can download and print the template at the top of this article or glance at it to cut your second sock into pieces. As you cut, go through both layers of fabric. Cut:^[7]

Sew each arm piece in half lengthwise and along 1 end. Use your sewing machine or needle and thread to sew across the cuff end and along the long side. Repeat this for the other arm.^[8]

Fold the tail piece in half lengthwise and sew it up. You’ll pretty much repeat what you did for the arms with the tail. Remember to leave 1 end open so you can stuff it later.^[9]

Sew the curved sides of the ears. Since these are pretty small, you’ll probably want to sew them by hand. Take an ear and fold it in half so the curved sides line up. Then, sew from 1 end of the curve to the other end.^[10]

Turn the pieces right side out and stuff them with polyfill. Take a small piece of polyfill and push it down into the sewn pieces. To make it a little easier, use the eraser-end of a pencil to push the polyfill down. Fill the arms and tail as much as you like.^[11]

Stitch the arms and tail to your monkey’s body. Hold or pin an arm onto the side of the body so it’s near the upper third of the body. Use a needle and thread to sew the end of the arm to the body. Go around it twice so it’s extra secure.^[12]

Stuff the mouth piece with polyfill and sew it to the monkey’s face. Take the rounded mouth piece and place stuffing into it. Turn it onto the bottom half of the head so the stuffing isn’t visible and sew the edges of the mouth piece to the head.^[13]

Stitch the ears onto the sides of the monkey’s head. Press the straight side of each ear onto the monkey’s temples. It might help to pin them in place so they don’t move while you’re sewing. Then, use a needle and thread to sew the straight sides onto the head. You may want to go back and forth a few times so they’re really sturdy.^[14]

Attach 2 black buttons for eyes. Thread a needle with black embroidery floss or thread and press a black button on the head so it’s above the mouth. Stitch from underneath the button through a hole and bring the needle down through the opposite hole—you’ll probably want to pass the thread through the holes 4 or 5 times. Then, stitch through the 2 diagonal holes before you sew on the other button.^[15]